China Hot selling 800tpd Oil Refining Plant near me shop

Product Description

Basic Info

Model No.: 50-1000t/d

Product Description
Our vegetable oil and fat refining line is used to refine various oils, including soybean oil, rapeseed oil, cottonseed oil, peanut oil, sunflower seed oil, maize germ oil, and rice bran oil. This production line features a capacity of 30-1,000 tons of crude oil per day, and is CZPT to eliminate plasticizer (DEHP) pollution and prevent the formation of trans fatty acids (TFA) in an efficient manner. According to different kind of crude oils,we will use different refining process. Chemical refining technology and physical refining technology are 2 kinds of refining process.
Process Workflow
OneRefining Workshop
Degumming and Neutralization → Bleaching→ Dewaxing→ Deodorization 
Two: Phospholipid Workshop
Crude Oil Filtration → Degumming → Phospholipid Concentration and Drying 

Three: Automatic Control System

(1) Degumming and Neutralization
mixer, reactor, heat exchanger, acid and alkali dosing device, separator, vacuum dryer, vacuum system


For specific kind and grade of crude oil , the degumming and neutralization process can be flexibly adjusted to improve product yield. Physical refining process is suitable for refining of high acid value oil. Efficient system of heat exchanging can reduce the consumption of steam significantly. Devices used in the process are all well sealed, which efficiently prevents air from entering and further avoids oil oxidation.



(2) Bleaching

Bleaching earth feeder,Pre-mixer ,Bleaching tank,filter,Bleaching vacuum system

The oil from neutralization section is mixed with bleaching earth for removal of pigments. The bleaching earth is transported in pneumatic mode, thus efficiently alleviate environment pollution caused by dust. The precise feeding system is used to quantify the bleaching earth, which contributes to accurate measurement and easy operation.

Mechanical agitation is carried out in the bleaching tower to ensure complete contact between the bleaching earth and the oil. As a result, stable and reliable performance and great bleaching effect can be achieved. Then, the bleaching earth is filtered out in vertical pressure leaf filters. It`s worth mentioning that there are 2 leaf filters, which work alternatively to improve service life. The bleached oil will go through a security filter for precision filtration. In this way, qualified bleached oil will be obtained.



(3) Dewaxing

crystallizer, maturing tank, heat exchanger, cooler, horizontal filter, filter press, conveyor and feeding device for filter aid and auxiliary devices including refrigerant unit, refrigerant circulating system, compressed air system and circulating water system

Oils like sunflower oil or corn germ oil have waxes present in them. At low temperature, these waxes gives hazy appearance to oil, which is not liked by consumers. It is therefore essential to remove these waxes prior to bottling and marketing of oil.

In our dewaxing process, continuous crystallization and crystal growth help to improve dewaxing efficiency significantly, thus reducing energy consumption and production cost. The oil after dewaxing have high quality and can passes national standards and even some strict standards.


(4) Deodorization

deodorization tower, fatty acid collecting system, vacuum system, heat exchanger, cooler, canned motor pump and auxiliary devices including high pressure steam boiler (thermal oil furnace) and circulating water system

Every vegetable oil has its own distinct natural odour. In addition, extra unpleasant odour is imparted to the oil during degumming and bleaching processes. Hence, it is essential to remove the odour from the bleached oil.

In the deodorization section, deodorization tower used is made up with filling plates and column trays to accommodate deodorization of various oils, especially physical refining process. During deodorization, steam jet vacuum pump is sharply cooled by circulating cool water, thus creating a high vacuum status, which helps to carry away odoriferous matter to the barometric condenser and reduces steam consumption and waste water emission. As a result, production environment will be improved and less installation space will be required. Furthermore, based on quality of crude oil, technological parameters of the process can be flexibly adjusted to prevent formation of trans-fatty acids.


(5) Crude Oil Filtration

leaf filter (vertical and horizontal), oil pump, storage tank, compressed air system

The process is designed to remove particulate matter from crude oil prior to refining process. Hence, product yield and quality are greatly improved for sequential processes. It is very convenient and easy to upload the particles since the process features high level of mechanization. There are 2 filters, which work alternatively to extend service life.

(6) Phospholipid Concentration and Drying


conditioning tank, film evaporator, vacuum system, phospholipid cooling device, phospholipid delivery pump, storage tank

The film evaporator adopted features high precision rotor and shell, large heat transfer coefficient, great evaporation intensity, low evaporation temperature and short staying time of materials. The vacuum system is designed with dividing-wall condensing system, which prevents waste water emission and therefore eliminate environment pollution.


(7) Automatic Control System

In the master control room, an efficient, stable and advanced DCS control system is equipped, which consists of operation station, control station and communication network.

The control system is characterized by high reliability, stability, great resistance to disturbance. It is also designed with features of remote monitor and fault diagnosis.

Every stage of the whole production line is dynamically and clearly displayed on the computer screen at the operation station. User-friendly human machine interface contributes to great convenience. Users can start or stop motors and electrical equipment just using the computer. In addition, it is very convenient to print relevant reports when it is required.

Acquisition and control of parameters are all accomplished by the programme written in the control station. In this way, operation station only undertakes things such as operation, parameter display, data record and data storage. As for important parameters, the control system is CZPT to ensure automatic control, data storage and alarm when values of these parameters exceed preset limit values.

PROFIBUS field bus network ensures rapid and reliable communication. Open ODBC and OLE standard interfaces are also equipped in the control system, which facilities communication with the host computer and other control systems.


We also provide the following project and equipment:
Oilseed Pretreatment Project
Oilseed Pressing Project
Oil Extraction Project 
Oil Refining Project 
Cottonseed Miscella Refining Project
Low Temperature and Edible Soybean Meal Project
Soy Protein Concentrate Project
Soy Protein Isolate Project
Cottonseed Protein Project
Full Fat Soybean Powder Project
ASME Pressure Vessel 
ASME Heat Exchanger 
Looking for ideal Oil Degumming Neutralization Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Oil Bleaching Deodorizing Machine are quality guaranteed. We are China Origin Factory of Oil Dewaxing System. If you have any question, please feel free to contact us.

The Functions of Splined Shaft Bearings

Splined shafts are the most common types of bearings for machine tools. They are made of a wide variety of materials, including metals and non-metals such as Delrin and nylon. They are often fabricated to reduce deflection. The tooth profile will become deformed with time, as the shaft is used over a long period of time. Splined shafts are available in a huge range of materials and lengths.


Splined shafts are used in a variety of applications and industries. They are an effective anti-rotational device, as well as a reliable means of transmitting torque. Other types of shafts are available, including key shafts, but splines are the most convenient for transmitting torque. The following article discusses the functions of splines and why they are a superior choice. Listed below are a few examples of applications and industries in which splines are used.
Splined shafts can be of several styles, depending on the application and mechanical system in question. The differences between splined shaft styles include the design of teeth, overall strength, transfer of rotational concentricity, sliding ability, and misalignment tolerance. Listed below are a few examples of splines, as well as some of their benefits. The difference between these styles is not mutually exclusive; instead, each style has a distinct set of pros and cons.
A splined shaft is a cylindrical shaft with teeth or ridges that correspond to a specific angular position. This allows a shaft to transfer torque while maintaining angular correspondence between tracks. A splined shaft is defined as a cylindrical member with several grooves cut into its circumference. These grooves are equally spaced around the shaft and form a series of projecting keys. These features give the shaft a rounded appearance and allow it to fit perfectly into a grooved cylindrical member.
While the most common applications of splines are for shortening or extending shafts, they can also be used to secure mechanical assemblies. An “involute spline” spline has a groove that is wider than its counterparts. The result is that a splined shaft will resist separation during operation. They are an ideal choice for applications where deflection is an issue.
A spline shaft’s radial torsion load distribution is equally distributed, unless a bevel gear is used. The radial torsion load is evenly distributed and will not exert significant load concentration. If the spline couplings are not aligned correctly, the spline connection can fail quickly, causing significant fretting fatigue and wear. A couple of papers discuss this issue in more detail.


There are many different types of splined shafts. Each type features an evenly spaced helix of grooves on its outer surface. These grooves are either parallel or involute. Their shape allows them to be paired with gears and interchange rotary and linear motion. Splines are often cold-rolled or cut. The latter has increased strength compared to cut spines. These types of shafts are commonly used in applications requiring high strength, accuracy, and smoothness.
Another difference between internal and external splined shafts lies in the manufacturing process. The former is made of wood, while the latter is made of steel or a metal alloy. The process of manufacturing splined shafts involves cutting furrows into the surface of the material. Both processes are expensive and require expert skill. The main advantage of splined shafts is their adaptability to a wide range of applications.
In general, splined shafts are used in machinery where the rotation is transferred to an internal splined member. This member can be a gear or some other rotary device. These types of shafts are often packaged together as a hub assembly. Cleaning and lubricating are essential to the life of these components. If you’re using them on a daily basis, you’ll want to make sure to regularly inspect them.
Crowned splines are usually involute. The teeth of these splines form a spiral pattern. They are used for smaller diameter shafts because they add strength. Involute splines are also used on instrument drives and valve shafts. Serration standards are found in the SAE. Both kinds of splines can also contain a ball bearing for high torque. The difference between the 2 types of splines is the number of teeth on the shaft.
Internal splines have many advantages over external ones. For example, an internal spline shaft can be made using a grinding wheel instead of a CNC machine. It also uses a more accurate and economical process. Furthermore, it allows for a shorter manufacturing cycle, which is essential when splining high-speed machines. In addition, it stabilizes the relative phase between the spline and thread.

Manufacturing methods

There are several methods used to fabricate a splined shaft. Key and splined shafts are constructed from 2 separate parts that are shaped in a synchronized manner to transfer torque uniformly. Hot rolling is 1 method, while cold rolling utilizes low temperatures to form metal. Both methods enhance mechanical properties, surface finishes, and precision. The advantage of cold rolling is its cost-effectiveness.
Cold forming is 1 method, as well as machining and assembling. Cold forming is a unique process that allows the spline to be shaped to the desired shape. The resulting shape provides maximum contact area and torsional strength. Standard splines are available in standard sizes, but custom lengths can also be ordered. CZPT offers various auxiliary equipment, such as mating sleeves and flanged bushings.
Cold forging is another method. This method produces long splined shafts that are used in automobile propellers. After the spline portion is cut out, it is worked on in a hobbing machine. Work hardening enhances the root strength of the splined portion. It can be used for bearings, gears, and other mechanical components. Listed below are the manufacturing methods for splined shafts.
Parallel splines are the simplest of the splined shaft manufacturing methods. Parallel splines are usually welded to shafts, while involute splines are made of metal or non-metals. Splines are available in a wide variety of lengths and materials. The process is usually accompanied by a process called milling. The workpiece rotates to produce the serrated surface.
Splines are internal or external grooves in a splined shaft. They work in combination with keyways to transfer torque. Male and female splines are used in gears. Female and male splines correspond to 1 another to ensure proper angular correspondence. Involute splines have more surface area and thus are stronger than external splines. Moreover, they help the shaft fit into a grooved cylindrical member without misalignment.
A variety of other methods of manufacturing a splined shaft can be used to produce a splined shaft. Spline shafts can be produced using broaching and shaping, 2 precision machining methods. Broaching uses a metal tool with successively larger teeth to remove metal and create ridges and holes in the surface of a material. However, this process is expensive and requires special expertise.


The splined shaft is a mechanical component with a helix-like shape formed by the equal spacing of grooves in a circular ring. The splines can either have parallel or involute sides. The splines minimize stress concentration in stationary joints and can be used in both rotary and linear motion. In some cases, splines are rolled rather than cut. The latter is more durable than cut splines and is often used in applications requiring high strength, accuracy, and smooth finish.
Splined shafts are commonly made of carbon steel. This alloy steel has a low carbon content, making it easy to work with. Carbon steel is a great choice for splines because it is malleable. Generally, high-quality carbon steel provides a consistent motion. Steel alloys are also available that contain nickel, chromium, copper, and other metals. If you’re unsure of the right material for your application, you can consult a spline chart.
Splines are a versatile mechanical component. They are easy to cut and fit. Splines can be internal or external, with teeth positioned at equal intervals on both sides of the shaft. This allows the shaft to engage with the hub around the entire circumference of the hub. It also increases load capacity by creating a constant multiple-tooth point of contact with the hub. For this reason, they’re used extensively in rotary and linear motion.
Splined shafts are used in a wide variety of industries. CZPT Inc. offers custom and standard splined shafts for a variety of applications. When choosing a splined shaft for a specific application, consider the surrounding mated components, torque requirements, and size requirements. These 3 factors will make it the ideal choice for your rotary equipment. And you’ll be pleased with the end result!
There are many types of splines and their applications are endless. They transfer torque and angular misalignment between parts, and they also enable the axial rotation of assembled components. Therefore, splines are an essential component of machinery and are used in a wide range of applications. This type of shaft can be found in various types of machines, from household appliances to industrial machinery. So, the next time you’re looking for a splined shaft, make sure you look for a splined one.

China Hot selling 800tpd Oil Refining Plant   near me shop China Hot selling 800tpd Oil Refining Plant   near me shop