Tag Archives: china bearing manufacturer

China manufacturer 513121 Wheel Hub Bearing Assembly for Buick Century / Cadillac Deville / Chevrolet Impala, Front and Rear Axle near me manufacturer

Product Description


OE Number 513121 Wheel Hub Bearing Assembly for Buick Century / Cadillac DeVille / Chevrolet Impala, Front and Rear Axle
Fitting Position Front and Rear alex
Applicable car Model Buick Century / Cadillac DeVille / Chevrolet Impala
Warranty 1 year / 3

Front and Rear Axle Hub with ABS sensor

Flange Diameter: 5.728 In.

Bolt Circle Diameter: 4.527 In.
Wheel Pilot Diameter: 2.759 In.
Brake Pilot Diameter: 2.759 In.
Flange Offset: 2.736 In.
Hub Pilot Diameter: 3.598 In.
Hub Bolt Circle Diameter: 4.566 In.
Bolt Size: M12X1.5
Bolt Quantity: 5
Bolt Hole MET: M12X1.75
Bolt Hole qty: 3
ABS Sensor: Has ABS with Integral Sensor

Number of Splines: 33



Buick Century 1997-2000
Buick Century 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Buick LeSabre 2000
Buick LeSabre 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Buick Park Avenue 1997-2000
Buick Park Avenue 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Buick CZPT 1997-2000
Buick CZPT 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Buick Rendezvous 2002-2007 AWD
Buick Riviera 1997-1999
Cadillac DeVille 2001 4-Wheel ABS, Except Heavy-duty Brakes, Steel Sensor Wire Clip Design
Cadillac DeVille 1997-2000 Except Heavy-duty Brakes
Cadillac Eldorado 1997-2000
Cadillac Eldorado 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Cadillac Seville 1997-2000
Cadillac Seville 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Chevrolet Impala 2000 4-Wheel ABS
Chevrolet Impala 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Chevrolet Monte Carlo 2000 4-Wheel ABS
Chevrolet Monte Carlo 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Chevrolet Venture 1997-2000
Chevrolet Venture 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Chevrolet Venture 2002-2004 AWD
Oldsmobile CZPT 1997-1999
Oldsmobile CZPT 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Oldsmobile Intrigue 1998-2000
Oldsmobile Intrigue 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Oldsmobile Silhouette 2002-2004 AWD
Oldsmobile Silhouette 1997-2000 FWD
Oldsmobile Silhouette 2001 FWD, 4-Wheel ABS, Steel Sensor Wire Clip Design
Pontiac Aztek 2001-2005 AWD
Pontiac Bonneville 2000
Pontiac Bonneville 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Pontiac Grand Prix 1997-2000
Pontiac Grand Prix 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Pontiac Montana 2001 4-Wheel ABS, Steel Sensor Wire Clip Design
Pontiac Montana 2001-2004 AWD
Pontiac Montana 2005 Base, AWD
Pontiac Montana 1999-2000 FWD
Pontiac Trans Sport 1997-1998

Model List (Please contact with us for more models)

OEM No. Parts No. Model
7466922 513016 GM
7470017 513121 BUICK
7470009 513087 BUICK
7470012/13 513061 GM
530 0571 9 513084 CHRYSLER
7466908 513017K BUICK
4340334 513074 CHRYSLER
274324 513175 VOLVO
4593003 513089 CHRYSLER
F50Y-1104A 513100 FORD
4338560 513082 DODGE
7466970 512001 GM
7466996 512004 OLDSMOBILE GM
3F12-2B664AA 512107 FORD LINCOLN
7467123 512150 BUICK OLDSMOBILE
7467127 512151 BUICK OLDSMOBILE
4683513 512155 CHRYSLER DODGE
4683513 512156 CHRYSLER DODGE
455716 512167 CHRYSLER DODGE
52730-3800 512191 HYUNDAI KIA
12413091 512237 BUICK CHRYSLER
7466918 513018 GM PONTIAC
42200-S04-005 513035 HONDA ROVER































ISHI front hub 2001- 2003

space wagon































A wide range of applications:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler.

Our Bearing Advantage:

1.ISO Standard

2.Bearing Small order accepted

3.In Stock bearing

4.OEM bearing service

5.Professional:20 years manufacture bearing

6.Customized bearing, Customer’s bearing drawing or samples accepted

7.Competitive price bearing

8.TT Payment or Western Union or PayPal

Our Company

Packaging Details 1 piece in a single box
50 boxes in a carton
20 cartons in a pallet
Nearest Port ZheJiang or HangZhou
Lead Time For stock parts: 1-5 days.
If no stock parts:
<200 pcs: 15-30 days
≥200 pcs: to be negotiated.


1.How do you make our business long-term and good relationship? 
– We keep good quality and competitive price to ensure our customers benefit ;
– We respect every customer as our friend and we sincerely do business and make friends with them,
  no matter where they come from.


2.Do you test all your goods before delivery?
– Yes, we have 100% test before delivery


3.What products does your company supply?
– Auto Bearings (Wheel Bearings, Wheel Hub Bearings, Clutch Bearings, Belt Tensioners and Water Pump Bearings etc. )    

-Industrial Bearings (Deep Groove Ball Bearings, Tapered Roller Bearings and Pillow Block Bearings).

Driveshaft structure and vibrations associated with it

The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let’s define what a driveshaft is.

transmission shaft

As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace 1 driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into 4 major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.


Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least 1 bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be 2 flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the 2 yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.

put up

The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least 1 end, and the at least 1 coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.


The most common cause of drive shaft vibration is improper installation. There are 5 common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you’re not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.


The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it’s important to note that quality doesn’t come cheap and you should always choose an axle based on what your budget can handle.

China manufacturer 513121 Wheel Hub Bearing Assembly for Buick Century / Cadillac Deville / Chevrolet Impala, Front and Rear Axle   near me manufacturer China manufacturer 513121 Wheel Hub Bearing Assembly for Buick Century / Cadillac Deville / Chevrolet Impala, Front and Rear Axle   near me manufacturer

China Standard 37230-35040 China factory drive shaft center support bearing near me manufacturer

OE NO.: 37230-35040
Measurement: OEM
Content: Metal+rubber
Design Quantity: 37230-35040
Warranty: 6 Months
Item Identify: Centre bearing
Color: Black, red, blue, purple, Zotye T600 5MT Unique Manufacturing facility Sale Model New Manual Transmission Gearbox for Zotye T600 eco-friendly, and so on.
Packing: Neutral Packing
Delivery time: thirty Times
Quality: Substantial-Top quality
Gain: Extended Durability
Position: Entrance Remaining Appropriate
Manufacturer: HZZN
Packaging Details: Specific in plastic bag and neutral box with label,boxes in fumigated pallets.

Specification Packing & Shipping and delivery To far better ensure the protection of your products, Solitary Pulley Block 304 Stainless Steel Lifting Crane Swivel Hook Wire Rope Solitary sheaved Pulley Roller professional, environmentally welcoming, practical and successful packaging companies will be provided. Business Profile FAQ Refer to samples price , we will revert it to you when we start our organization transaction. Or if you agree to area us your trialorder now, Progress Maritime auxiliary equipment HangZhou Hydraulic clutch gearbox HCL250F we can send samples in cost-free of cost.

What is a drive shaft?

If you recognize a clicking noise while driving, it is most likely the driveshaft. An experienced car mechanic will be ready to notify you if the noise is coming from equally sides or from one facet. If it only occurs on 1 facet, you should examine it. If you notice sound on both sides, you ought to speak to a mechanic. In either situation, a substitution driveshaft should be simple to uncover.

The travel shaft is a mechanical component

A driveshaft is a mechanical gadget that transmits rotation and torque from the engine to the wheels of the car. This element is vital to the procedure of any driveline, as the mechanical energy from the motor is transmitted to the PTO (electrical power get-off) shaft, which hydraulically transmits that electrical power to linked tools. Diverse drive shafts have diverse combos of joints to compensate for modifications in shaft duration and angle. Some varieties of generate shafts consist of connecting shafts, inside continual velocity joints, and external set joints. They also contain anti-lock method rings and torsional dampers to avert overloading the axle or leading to the wheels to lock.
Although driveshafts are relatively mild, they require to take care of a great deal of torque. Torque applied to the drive shaft generates torsional and shear stresses. Simply because they have to stand up to torque, these shafts are developed to be lightweight and have minor inertia or weight. For that reason, they usually have a joint, coupling or rod between the two components. Parts can also be bent to accommodate adjustments in the distance among them.
The push shaft can be manufactured from a variety of supplies. The most frequent substance for these parts is steel, even though alloy steels are often utilized for high-power purposes. Alloy steel, chromium or vanadium are other components that can be utilized. The type of materials utilised is dependent on the application and measurement of the part. In several instances, steel driveshafts are the most durable and most inexpensive option. Plastic shafts are utilised for light-weight obligation apps and have various torque ranges than metal shafts.

It transfers electrical power from the engine to the wheels

A car’s powertrain is composed of an electric motor, transmission, and differential. Every area performs a distinct occupation. In a rear-wheel push vehicle, the electricity created by the motor is transmitted to the rear tires. This arrangement increases braking and managing. The differential controls how considerably electricity every single wheel gets. The torque of the engine is transferred to the wheels according to its pace.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its work is to make certain energy is shipped to the wheels. Electric powered vehicles can’t drive them selves and need a gearbox to travel forward. It also controls how considerably electricity reaches the wheels at any given moment. The transmission is the very last element of the electricity transmission chain. Despite its many names, the transmission is the most complicated ingredient of a car’s powertrain.
The driveshaft is a prolonged steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints hook up to the push shaft and provide versatile pivot points. The differential assembly is mounted on the push shaft, allowing the wheels to switch at different speeds. The differential makes it possible for the wheels to change at distinct speeds and is extremely crucial when cornering. Axles are also critical to the efficiency of the auto.

It has a rubber boot that protects it from dust and dampness

To preserve this boot in great situation, you must clear it with cold water and a rag. Never area it in the dryer or in immediate daylight. Warmth can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, implement rubber conditioner to them routinely. Indigenous peoples in the Amazon region gather latex sap from the bark of rubber trees. Then they set their feet on the hearth to solidify the sap.

it has a U-shaped connector

The push shaft has a U-joint that transfers rotational vitality from the engine to the axle. Faulty gimbal joints can result in vibrations when the car is in motion. This vibration is typically mistaken for a wheel stability issue. Wheel harmony issues can lead to the automobile to vibrate even though driving, even though a U-joint failure can result in the vehicle to vibrate when decelerating and accelerating, and cease when the car is stopped.
The drive shaft is related to the transmission and differential making use of a U-joint. It enables for modest alterations in place in between the two factors. This prevents the differential and transmission from remaining completely aligned. The U-joint also enables the generate shaft to be linked unconstrained, making it possible for the car to go. Its principal objective is to transmit electrical energy. Of all sorts of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints ought to be inspected at minimum two times a year, and the joints ought to be greased. When checking the U-joint, you need to listen to a dull sound when modifying gears. A clicking seem signifies insufficient grease in the bearing. If you listen to or feel vibrations when shifting gears, you may need to have to support the bearings to prolong their lifestyle.

it has a slide-in tube

The telescopic layout is a contemporary substitute to traditional driveshaft styles. This innovative design and style is dependent on an unconventional layout philosophy that combines developments in materials science and manufacturing processes. As a result, they are more effective and lighter than typical designs. Slide-in tubes are a easy and productive design answer for any automobile software. Right here are some of its advantages. Read through on to learn why this kind of shaft is best for numerous purposes.
The telescopic travel shaft is an critical component of the standard car transmission technique. These driveshafts allow linear motion of the two factors, transmitting torque and rotation throughout the vehicle’s driveline. They also take in energy if the car collides. Frequently referred to as foldable driveshafts, their reputation is right dependent on the evolution of the automotive market.

It utilizes a bearing push to replace worn or ruined U-joints

A bearing press is a gadget that utilizes a rotary push mechanism to put in or eliminate worn or ruined U-joints from a generate shaft. With this instrument, you can replace worn or destroyed U-joints in your automobile with relative ease. The very first action requires positioning the drive shaft in the vise. Then, use the eleven/sixteen” socket to push the other cup in much enough to install the clips. If the cups never fit, you can use a bearing press to get rid of them and repeat the process. Following getting rid of the U-joint, use a grease nipple Make confident the new grease nipple is installed correctly.
Worn or ruined U-joints are a main source of driveshaft failure. If 1 of them were destroyed or broken, the total driveshaft could dislocate and the auto would shed electrical power. Except if you have a specialist mechanic undertaking the repairs, you will have to change the whole driveshaft. Fortunately, there are numerous techniques to do this oneself.
If any of these warning symptoms appear on your motor vehicle, you should take into account changing the ruined or worn U-joint. Widespread symptoms of ruined U-joints consist of rattling or periodic squeaking when shifting, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these indicators, get your car to a competent mechanic for a entire inspection. Neglecting to substitute a worn or broken u-joint on the driveshaft can consequence in pricey and unsafe repairs and can result in important damage to your motor vehicle.

China Standard 37230-35040 China factory drive shaft center support bearing  near me manufacturer China Standard 37230-35040 China factory drive shaft center support bearing  near me manufacturer