Product Description

Basic Info

Model No.: 50-1000t/d

Product Description
Our vegetable oil and fat refining line is used to refine various oils, including soybean oil, rapeseed oil, cottonseed oil, peanut oil, sunflower seed oil, maize germ oil, and rice bran oil. This production line features a capacity of 30-1,000 tons of crude oil per day, and is CZPT to eliminate plasticizer (DEHP) pollution and prevent the formation of trans fatty acids (TFA) in an efficient manner. According to different kind of crude oils,we will use different refining process. Chemical refining technology and physical refining technology are 2 kinds of refining process.
Process Workflow
One: Refining Workshop
Degumming and Neutralization → Bleaching→ Dewaxing→ Deodorization 
Two: Phospholipid Workshop
Crude Oil Filtration → Degumming → Phospholipid Concentration and Drying 

Three: Automatic Control System

(1) Degumming and Neutralization
Devices
mixer, reactor, heat exchanger, acid and alkali dosing device, separator, vacuum dryer, vacuum system

Features

For specific kind and grade of crude oil , the degumming and neutralization process can be flexibly adjusted to improve product yield. Physical refining process is suitable for refining of high acid value oil. Efficient system of heat exchanging can reduce the consumption of steam significantly. Devices used in the process are all well sealed, which efficiently prevents air from entering and further avoids oil oxidation.

 

 

(2) Bleaching

Devices
Bleaching earth feeder,Pre-mixer ,Bleaching tank,filter,Bleaching vacuum system

Features
The oil from neutralization section is mixed with bleaching earth for removal of pigments. The bleaching earth is transported in pneumatic mode, thus efficiently alleviate environment pollution caused by dust. The precise feeding system is used to quantify the bleaching earth, which contributes to accurate measurement and easy operation.

Mechanical agitation is carried out in the bleaching tower to ensure complete contact between the bleaching earth and the oil. As a result, stable and reliable performance and great bleaching effect can be achieved. Then, the bleaching earth is filtered out in vertical pressure leaf filters. It`s worth mentioning that there are 2 leaf filters, which work alternatively to improve service life. The bleached oil will go through a security filter for precision filtration. In this way, qualified bleached oil will be obtained.

 

 

(3) Dewaxing

Devices
crystallizer, maturing tank, heat exchanger, cooler, horizontal filter, filter press, conveyor and feeding device for filter aid and auxiliary devices including refrigerant unit, refrigerant circulating system, compressed air system and circulating water system

Features
Oils like sunflower oil or corn germ oil have waxes present in them. At low temperature, these waxes gives hazy appearance to oil, which is not liked by consumers. It is therefore essential to remove these waxes prior to bottling and marketing of oil.

In our dewaxing process, continuous crystallization and crystal growth help to improve dewaxing efficiency significantly, thus reducing energy consumption and production cost. The oil after dewaxing have high quality and can passes national standards and even some strict standards.
 

 

(4) Deodorization

Devices 
deodorization tower, fatty acid collecting system, vacuum system, heat exchanger, cooler, canned motor pump and auxiliary devices including high pressure steam boiler (thermal oil furnace) and circulating water system

Features
Every vegetable oil has its own distinct natural odour. In addition, extra unpleasant odour is imparted to the oil during degumming and bleaching processes. Hence, it is essential to remove the odour from the bleached oil.

In the deodorization section, deodorization tower used is made up with filling plates and column trays to accommodate deodorization of various oils, especially physical refining process. During deodorization, steam jet vacuum pump is sharply cooled by circulating cool water, thus creating a high vacuum status, which helps to carry away odoriferous matter to the barometric condenser and reduces steam consumption and waste water emission. As a result, production environment will be improved and less installation space will be required. Furthermore, based on quality of crude oil, technological parameters of the process can be flexibly adjusted to prevent formation of trans-fatty acids.

 

(5) Crude Oil Filtration
Devices
leaf filter (vertical and horizontal), oil pump, storage tank, compressed air system

Features
The process is designed to remove particulate matter from crude oil prior to refining process. Hence, product yield and quality are greatly improved for sequential processes. It is very convenient and easy to upload the particles since the process features high level of mechanization. There are 2 filters, which work alternatively to extend service life.

(6) Phospholipid Concentration and Drying

Devices

conditioning tank, film evaporator, vacuum system, phospholipid cooling device, phospholipid delivery pump, storage tank

Features
The film evaporator adopted features high precision rotor and shell, large heat transfer coefficient, great evaporation intensity, low evaporation temperature and short staying time of materials. The vacuum system is designed with dividing-wall condensing system, which prevents waste water emission and therefore eliminate environment pollution.

 

(7) Automatic Control System

In the master control room, an efficient, stable and advanced DCS control system is equipped, which consists of operation station, control station and communication network.

Features
The control system is characterized by high reliability, stability, great resistance to disturbance. It is also designed with features of remote monitor and fault diagnosis.

Every stage of the whole production line is dynamically and clearly displayed on the computer screen at the operation station. User-friendly human machine interface contributes to great convenience. Users can start or stop motors and electrical equipment just using the computer. In addition, it is very convenient to print relevant reports when it is required.

Acquisition and control of parameters are all accomplished by the programme written in the control station. In this way, operation station only undertakes things such as operation, parameter display, data record and data storage. As for important parameters, the control system is CZPT to ensure automatic control, data storage and alarm when values of these parameters exceed preset limit values.

PROFIBUS field bus network ensures rapid and reliable communication. Open ODBC and OLE standard interfaces are also equipped in the control system, which facilities communication with the host computer and other control systems.

 

We also provide the following project and equipment:
Oilseed Pretreatment Project
Oilseed Pressing Project
Oil Extraction Project 
Oil Refining Project 
Cottonseed Miscella Refining Project
Low Temperature and Edible Soybean Meal Project
Soy Protein Concentrate Project
Soy Protein Isolate Project
Cottonseed Protein Project
Full Fat Soybean Powder Project
ASME Pressure Vessel 
ASME Heat Exchanger 
Looking for ideal Oil Degumming Neutralization Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Oil Bleaching Deodorizing Machine are quality guaranteed. We are China Origin Factory of Oil Dewaxing System. If you have any question, please feel free to contact us.

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its 2 outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between 1 thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in 1 turn. While lead and pitch are 2 separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are 3 different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from 1 manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than 1 made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each 1 will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between 2 and 16 millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are 2 basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.