Tag Archives: tractor front loader

China supplier Ce Titan Tl25f 2.5 Ton Tractor Front Shovel Loader with Good quality

Product Description


CE Titan TL25f 2.5 Ton Tractor Front Shovel Loader

Adopt CUMMINS, YUCHAI engine, powerful and reliable.Torque converter and counter-shaft trans mission gearbox,
assembled separately, higher reliability and easier maintenance.
Fully hydraulic steering system, powedr shift transmission, easier operation.Bucket can be leveled automatically,
optimized working device, higher productivity.
Comfortable operation environment, new desigh cabin, air-condition at option.
Various working devices of attachment are available, such as log grapple, pipe fork, grass fork, CZPT bucket, snowblade,
pallet fork etc. to meet different need.

 

TL25WHEEL LOADER SPECIFICATION
ITEM SPECIFICATION ITEM SPECIFICATION
Overall working weight 6500kg Max. speed 36km/h
Rated bucket capacity 1.3m3 Front and rear axles
Rated load 2500kg Main transmission type Sprial gear, first stage decelerate
Max. tractive force 55KN Final decelerate type Fist stage, planetary gear decelerate
Max. breakout force ≥58KN Tyre
Max gradeablity 30o Tyre specification 17.5-25
Max. dumping height 3500mm Front tyre pressure 350KPa
Dumping distance 900mm Rear tyre pressure 350KPa
Overall dimension 6200*2050*2580mm Steering system
Engine Steering System Type Articulated load-sensing hydraulic steering system
Model Yuchai Steering angle ±35o
Type inline, water cooling, dry cylinder, direct injection Mini turning radius 4800mm
Number of cylinder-bore/stroke 4 system working pressure 16MPa
Rated power 85kw Boom lifting time 5s
Rated speed 2200r/min Total time 10s
Mini fuel-consume ratio ≤220g/kw.h Brake system
Transmission system Sevice brake Air-on-oil, caliper-disk
Torque converter Single-stage parking brake Manual caliper disc
Torque ratio 3.2 Capacity
Transmission type Planetary power shift Fuel 80L
Gear shift 4 forwardshift, 4reverseshift Hydraulic 80L


The standard equipment:

—Standard Bucket or 4 in 1 bucket and pallet fork,
—Hydraulic Torque Converter Transmission,
—Floating Function,
—Pilot joystick control,
—130W Heater, 220V Engine Heater,
—Rops&Fops Cabin,
—Tipping Cabin,
—Luxury Cabin Inside,
—Backward Imagine,
—Comfortable Seat,
—Adjustable Steering Wheel,
—Wheel Reducer Axle,
—Air Brake,
—Lock for Lifting and Steering Cylinder,
—Hydraulic Pressure Check System,
—Parallel Linkage,
—Free Service Spare Parts etc.

 

What You Should Know About Axle Shafts

There are several things you should know about axle shafts. These include what materials they’re made of, how they’re constructed, and the signs of wear and tear. Read on to learn more about axle shafts and how to properly maintain them. Axle shafts are a crucial part of any vehicle. But how can you tell if 1 is worn out? Here are some tips that can help you determine whether it’s time to replace it.

Materials used for axle shafts

When it comes to materials used in axle shafts, there are 2 common types of materials. One is carbon fiber, which is relatively uncommon for linear applications. Carbon fiber shafting is produced by CZPT(r). The main benefit of carbon fiber shafting is its ultra-low weight. A carbon fiber shaft of 20mm diameter weighs just 0.17kg, as opposed to 2.46kg for a steel shaft of the same size.
The other type of material used in axle shafts is forged steel. This material is strong, but it is difficult to machine. The resulting material has residual stresses, voids, and hard spots that make it unsuitable for some applications. A forged steel shaft will not be able to be refinished to its original dimensions. In such cases, the shaft must be machined down to reduce the material’s hardness.
Alternatively, you can choose to purchase a through-hardened shaft. These types of axle shafts are suitable for light cars and those that use single bearings on their hub. However, the increased diameter of the axle shaft will result in less resistance to shock loads and torsional forces. For these applications, it is best to use medium-carbon alloy steel (MCA), which contains nickel and chromium. In addition, you may also need to jack up your vehicle to replace the axle shaft.
The spline features of the axle shaft must mate with the spline feature on the axle assembly. The spline feature has a slight curve that optimizes contact surface area and distribution of load. The process involves hobbing and rolling, and it requires special tooling to form this profile. However, it is important to note that an axle shaft with a cut spline will have a 30% smaller diameter than the corresponding 1 with an involute profile.
Another common material is the 300M alloy, which is a modified 4340 chromoly. This alloy provides additional strength, but is more prone to cracking. For this reason, this alloy isn’t suited for street-driven vehicles. Axle shafts made from this alloy are magnaflushed to detect cracks before they cause catastrophic failure. This heat treatment is not as effective as the other materials, but it is still a good choice for axle shafts.
Driveshaft

Construction

There are 3 basic types of axle shafts: fully floating, three-quarter floating, and semi-floating. Depending on how the shaft is used, the axles can be either stationary or fully floating. Fully floating axle shafts are most common, but there are exceptions. Axle shafts may also be floating or stationary, or they may be fixed. When they are stationary, they are known as non-floating axles.
Different alloys have different properties. High-carbon steels are harder than low-carbon steels, while medium-carbon steels are less ductile. Medium-carbon steel is often used in axle shafts. Some shafts contain additional metals, including silicon, nickel, and copper, for case hardening. High-carbon steels are preferred over low-carbon steels. Axle shafts with high carbon content often have better heat-treatability than OE ones.
A semi-floating axle shaft has a single bearing between the hub and casing, relieving the main shear stress on the shaft but must still withstand other stresses. A half shaft needs to withstand bending loads from side thrust during cornering while transmitting driving torque. A three-quarter floating axle shaft is typically fitted to commercial vehicles that are more capable of handling higher axle loads and torque. However, it is possible to replace or upgrade the axle shaft with a replacement axle shaft, but this will require jacking the vehicle and removing the studs.
A half-floating axle is an alternative to a fixed-length rear axle. This axle design is ideal for mid-size trucks. It supports the weight of the mid-size truck and may support mid-size trucks with high towing capacities. The axle housing supports the inner end of the axle and also takes up the end thrust from the vehicle’s tires. A three-quarter floating axle, on the other hand, is a complex type that is not as simple as a semi-floating axle.
Axle shafts are heavy-duty load-bearing components that transmit rotational force from the rear differential gearbox to the rear wheels. The half shaft and the axle casing support the road wheel. Below is a diagram of different forces that can occur in the axle assembly depending on operating conditions. The total weight of the vehicle’s rear can exert a bending action on the half shaft, and the overhanging section of the shaft can be subject to a shearing force.
Driveshaft

Symptoms of wear out

The constant velocity axle, also called the half shaft, transmits power from the transmission to the wheels, allowing the vehicle to move forward. When it fails, it can result in many problems. Here are 4 common symptoms of a bad CV axle:
Bad vibrations: If you notice any sort of abnormal vibration while driving, this may be a sign of axle damage. Vibrations may accompany a strange noise coming from under the vehicle. You may also notice tire wobble. It is important to repair this problem as it could be harmful to your car’s handling and comfort. A damaged axle is generally accompanied by other problems, including a weak braking response.
A creaking or popping sound: If you hear this noise when turning your vehicle, you probably have a worn out CV axle. When the CV joints lose their balance, the driveshaft is no longer supported by the U-joints. This can cause a lot of vibrations, which can reduce your vehicle’s comfort and safety. Fortunately, there are easy ways to check for worn CV axles.
CV joints: A CV joint is located at each end of the axle shaft. In front-wheel drive vehicles, there are 2 CV joints, 1 on each axle. The outer CV joint connects the axle shaft to the wheel and experiences more movement. In fact, the CV joints are only as good as the boot. The most common symptoms of a failed CV joint include clicking and popping noises while turning or when accelerating.
CV joint: Oftentimes, CV joints wear out half of the axle shaft. While repairing a CV joint is a viable repair, it is more expensive than replacing the axle. In most cases, you should replace the CV joint. Replacement will save you time and money. ACV joints are a vital part of your vehicle’s drivetrain. Even if they are worn, they should be checked if they are loose.
Unresponsive acceleration: The vehicle may be jerky, shuddering, or slipping. This could be caused by a bent axle. The problem may be a loose U-joint or center bearing, and you should have your vehicle inspected immediately by a qualified mechanic. If you notice jerkiness, have a mechanic check the CV joints and other components of the vehicle. If these components are not working properly, the vehicle may be dangerous.
Driveshaft

Maintenance

There are several points of concern regarding the maintenance of axle shafts. It is imperative to check the axle for any damage and to lubricate it. If it is clean, it may be lubricated and is working properly. If not, it will require replacement. The CV boots need to be replaced. A broken axle shaft can result in catastrophic damage to the transmission or even cause an accident. Fortunately, there are several simple ways to maintain the axle shaft.
In addition to oil changes, it is important to check the differential lube level. Some differentials need cleaning or repacking every so often. CZPT Moreno Valley, CA technicians know how to inspect and maintain axles, and they can help you determine if a problem is affecting your vehicle’s performance. Some common signs of axle problems include excessive vibrations, clunking, and a high-pitched howling noise.
If you’ve noticed any of these warning signs, contact your vehicle’s manufacturer. Most manufacturers offer service for their axles. If it’s too rusted or damaged, they’ll replace it for you for free. If you’re in doubt, you can take it to a service center for a repair. They’ll be happy to assist you in any aspect of your vehicle’s maintenance. It’s never too early to begin.
CZPT Moreno Valley, CA technicians are well-versed in the repair of axles and differentials. The CV joint, which connects the car’s transmission to the rear wheels, is responsible for transferring the power from the engine to the wheels. Aside from the CV joint, there are also protective boots on both ends of the axle shaft. The protective boots can tear with age or use. When they tear, they allow grease and debris to escape and get into the joint.
While the CV joint is the most obvious place to replace it, this isn’t a time to ignore this important component. Taking care of the CV joint will protect your car from costly breakdowns at the track. While servicing half shafts can help prevent costly replacement of CV joints, it’s best to do it once a season or halfway through the season. ACV joints are essential for your car’s safety and function.

China supplier Ce Titan Tl25f 2.5 Ton Tractor Front Shovel Loader   with Good qualityChina supplier Ce Titan Tl25f 2.5 Ton Tractor Front Shovel Loader   with Good quality

China wholesaler China 2.5 Ton Payloader Machinemini Farm Tractor with Front End Loader with Good quality

Product Description

China High Quality Agricultural Machinery TL25 Front End Wheel Loader
Product Application

TL25 loader is our latest development of a medium-sized loader.
–Adopt CUMMINS, YUCHAI engine, powerful and reliable.
–Torque converter and counter-shaft trans mission gearbox, assembled separately, higher reliability and easier maintenance.
–Fully hydraulic steering system, powedr shift transmission, easier operation.
–Bucket can be leveled automatically, optimized working device, higher productivity.
–Comfortable operation environment, new desigh cabin, air-condition at option.
–Various working devices of attachment are available, such as log grapple, pipe fork, grass fork, CZPT bucket, snowblade, pallet fork etc. to meet different need.

ITEM SPECIFICATION ITEM SPECIFICATION
Overall working weight 6500kg Front and rear axles
Rated bucket capacity 1.3m³ Main transmission type Spiral gear,first stage decelerate
Rated load 2500kg Final decelerate type First stage,planetary gear decelerate
Max.tractive force 55KN Tyre  
Max.breakout force ≥58KN Tyre specification 16/70-24
Max.grade ability 30° Front tyre pressure 350KPa
Max. dumping height 3600mm Front tyre pressure 350KPa
Dumping distance 900mm Steering system
Overall dimension(L*W*H) 6200*2050*2850mm Type Articulated load-sensing hydraulic steering system
Engine Steering angle ±35°
Model Yuchai Mini turning radius 4800mm
Type Inline,water cooling.dry cylinder,direct injection system working pressure 16MPa
Number of cylinder-bore/stroke 4 Boom lifting time 5s
Rated power/Rated speed 85KW / 2200r/min Total time 10s
Transimission system Brake system
Torque converter Single-stage Service brake Air-on-oil, caliper-disk
Torque ratio 3.2 parking brake Manual caliper disc
Transmission type Planetary power shift Capacity
Gear shift 4 forwardshift,4 reverseshift Fuel 60L
Max.speed 36km/h Hydraulic 60

Main features
1)6.5ton operating weight,heavy duty!
2) Maximum speed 36km/h,fast!fast!fast!
3) Dumping height:3600mm!
4) Luxury appearance
5) With many attachments,all configuratin customer can choose.
6)With famous CZPT 4BT3*-C100
 Motor.
Details

Standard Equipments
—Standard Bucket,
—Hydraulic Torque Converter Transmission,
—Floating Function,
—Mechanical Joystick,
—AC Cabin,
—Rops&Fops Cabin,
—Tipping Cabin,
—Luxury Cabin Inside,
—Backward Imagine,
—Comfortable Seat,
—Adjustable Steering Wheel,
—Wheel Reducer Axle,
—Air Brake,
—Lock for Lifting and Steering Cylinder,
—Hydraulic Pressure Check System,
—Parallel Linkage,
–E4 Lamp,
–Free Service Spare Parts etc.

All the machine with CE ISO SGS certificate.

Attachments
Titan wheel loader adopts the Hydraulic Quick Hitch. All kinds of accessories can be replaced. Such as: log grapple, grab bucket, pallet fork, road sweeper, ripper, 4 in 1 bucket, snow blade, angle blade, grass fork, hay fork, screening bucket, hydraulic hammer, stick rake,auger and so on.

Packaging details
TITAN Transport packaging team helps our customer to transport their machine in safe and secure way without any damage. Close to HangZhou port, we have the natural advantage to deliver your cargo safe, on time with competitive freight cost.

Our Service

Our trained Professional service team offers high quality in-time service in a very friendly way.
For a good customer experience, the content of pre -sales includes the recommendation on the right products basis on condition. All you have to do is to inform us your needs.
For After-sales, to minimize the downtime, we offer air delivery for the spare parts which are within guarantee within 3 working days.
We have professional technician to support trouble clearing and maintenance.

Pre-Sales Service
(1) Inquiry and consulting support. 
(2)Sample testing support. 
(3)View our Factory.

After-Sales Service
(1)Training how to instal the machine, training how to use the machine. 
(2)Engineers available to service machinery overseas.

About us
Our company HangZhou Titan Heavy Machinery ,We are a professional wheel loader and excavator factory in China,owns more than 11 years experiences on producing and exporting wheel loader.We are actively trying to develop agents all over the world, looking forward to cooperating with you.

FAQ
 

Q:Why choose Titan?
We sell every machine at a fair price.As our production increases,we are getting much support from the purchase source of raw meterial. 
We leave the maximum profit to customer.
1) Titan: an experienced loader manufacturer with over 11 years.
2) Titan team: customers-focused,you’ll get reply within 5 minutes.
3)Titan: premium quality with reasonable price.
4) Titan: CE,BV,SGS,ROPS and FOPS,ISO9001:2008 varified.
The quality control is not an empty word in TITAN.Our products are tested and granted CE cetificate.

Q:What is Titan warranty?
TITAN has a professional sales and after-service team.We are trying our best to make a good service for every customer.
1) Titan after-sales: life-long, meantime offer one year and 1 month warranty.
2) Titan proposal: order some wearing parts with loader for easy maintenance.

Q:What about Titan delivery term?
TITAN Transport packsging team helps our customer to transport their machine in safe and secure way without any damage.
10-20 days after down payment received.

Q:What about the payment term?
30% advance payment,70% balance by T/T.

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which 1 is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.
screwshaft

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, 1 should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are 2 major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically 1 millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect 2 elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China wholesaler China 2.5 Ton Payloader Machinemini Farm Tractor with Front End Loader   with Good qualityChina wholesaler China 2.5 Ton Payloader Machinemini Farm Tractor with Front End Loader   with Good quality

China high quality 2.5ton 2500kg Farm Looader Mini Woods Front End Whell Bucket White Yard CZPT Wheel Loader Compact Tractor with V Snow Blade with high quality

Product Description

Chinese Brand Agricultural Machinery 2.5 Ton Wheel Loader

Product Application

ITEM SPECIFICATION ITEM SPECIFICATION
Overall working weight 6500kg Front and rear axles
Rated bucket capacity 1.3m³ Main transmission type Spiral gear,first stage decelerate
Rated load 2500kg Final decelerate type First stage,planetary gear decelerate
Max.tractive force 55KN Tyre
Max.breakout force ≥58KN Tyre specification 16/70-24
Max.grade ability 30° Front tyre pressure 350KPa
Max. dumping height 3600mm Front tyre pressure 350KPa
Dumping distance 900mm Steering system
Overall dimension(L*W*H) 6200*2050*2850mm Type Articulated load-sensing hydraulic steering system
Engine Steering angle ±35°
Model Yuchai Mini turning radius 4800mm
Type Inline,water cooling.dry cylinder,direct injection system working pressure 16MPa
Number of cylinder-bore/stroke 4 Boom lifting time 5s
Rated power/Rated speed 85KW / 2200r/min Total time 10s
Transimission system Brake system
Torque converter Single-stage Service brake Air-on-oil, caliper-disk
Torque ratio 3.2 parking brake Manual caliper disc
Transmission type Planetary power shift Capacity
Gear shift 4 forwardshift,4 reverseshift Fuel 60L
Max.speed 36km/h Hydraulic 60

TL25 loader is our latest development of a medium-sized loader.
–Adopt CUMMINS, YUCHAI engine, powerful and reliable.
–Torque converter and counter-shaft trans mission gearbox, assembled separately, higher reliability and easier maintenance.
–Fully hydraulic steering system, powedr shift transmission, easier operation.
–Bucket can be leveled automatically, optimized working device, higher productivity.
–Comfortable operation environment, new desigh cabin, air-condition at option.
–Various working devices of attachment are available, such as log grapple, pipe fork, grass fork, CZPT bucket, snowblade, pallet fork etc. to meet different need.

Main features
1)6.5ton operating weight,heavy duty!
2) Maximum speed 36km/h,fast!fast!fast!
3) Dumping height:3600mm!
4) Luxury appearance
5) With many attachments,all configuratin customer can choose.

Standard Equipments
—Standard Bucket,
—Hydraulic Torque Converter Transmission,
—Floating Function,
—Mechanical Joystick,
—AC Cabin,
—Rops&Fops Cabin,
—Tipping Cabin,
—Luxury Cabin Inside,
—Backward Imagine,
—Comfortable Seat,
—Adjustable Steering Wheel,
—Wheel Reducer Axle,
—Air Brake,
—Lock for Lifting and Steering Cylinder,
—Hydraulic Pressure Check System,
—Parallel Linkage,
–E4 Lamp,
–Free Service Spare Parts etc

Certifications
All the machine with CE ISO SGS certificate.

Attachments
Titan wheel loader adopts the Hydraulic Quick Hitch. All kinds of accessories can be replaced. Such as: log grapple, grab bucket, pallet fork, road sweeper, ripper, 4 in 1 bucket, snow blade, angle blade, grass fork, hay fork, screening bucket, hydraulic hammer, stick rake,auger and so on.

Our Service

Our trained Professional service team offers high quality in-time service in a very friendly way.
For a good customer experience, the content of pre -sales includes the recommendation on the right products basis on condition. All you have to do is to inform us your needs.
For After-sales, to minimize the downtime, we offer air delivery for the spare parts which are within guarantee within 3 working days.
We have professional technician to support trouble clearing and maintenance.

Pre-Sales Service
(1) Inquiry and consulting support. 
(2)Sample testing support. 
(3)View our Factory.

After-Sales Service
(1)Training how to instal the machine, training how to use the machine. 
(2)Engineers available to service machinery overseas.
Packing & Delivery
We use container transportation,according to your requirements,for you to choose the appropriate collccation If container is too tighber,we will use pefilm for packing or pack it accordfng to customers special requset.

About Us

                      HangZhou Titan Heavy Machinery Co. Ltd

HangZhou Titan Heavy Machinery Co. Ltd is a professional manufacturer engaged in the research, development, production, sale and service of wheel loader, excavator and forklift.
In addition, we have obtained many kinds of certificates SGS, ISO CE etc. Whether selecting a current product from our catalog orseeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
We sincerely thank all the friend’s support at home andabroad, look forward to establish development business cooperation with you, hand in hand advances boldly, create prosperity.
Our agent is interviewed by local TV station,give you a reason why choose titan.we provide our agents with technical support,service suport,exhibition support,price support,quality support and help them to open the local market and establish long-term cooperation.

FAQ

Q:Why choose Titan?
We sell every machine at a fair price.As our production increases,we are getting much support from the purchase source of raw meterial. 
We leave the maximum profit to customer.
1) Titan: an experienced loader manufacturer with over 11 years.
2) Titan team: customers-focused,you’ll get reply within 5 minutes.
3)Titan: premium quality with reasonable price.
4) Titan: CE,BV,SGS,ROPS and FOPS,ISO9001:2008 varified.
The quality control is not an empty word in TITAN.Our products are tested and granted CE cetificate.

Q:What is Titan warranty?
TITAN has a professional sales and after-service team.We are trying our best to make a good service for every customer.
1) Titan after-sales: life-long, meantime offer one year and 1 month warranty.
2) Titan proposal: order some wearing parts with loader for easy maintenance.

Q:What about Titan delivery term?
TITAN Transport packsging team helps our customer to transport their machine in safe and secure way without any damage.
10-20 days after down payment received.

Q:What about the payment term?
30% advance payment,70% balance by T/T.

Axle Spindle Types and Installation

Are you looking for a new axle spindle for your vehicle? If so, you’ve come to the right place. Learn more about their types, functions, and installation. After reading this article, you’ll be well on your way to finding your new axle spindle. Axle spindles are essential to your vehicle. There are several types and each has unique characteristics. Here’s how to choose the best 1 for your car.

Dimensions

Axle spindle dimensions are crucial for safe wheel support. This component experiences significant stress and load during bearing mounting and must provide sufficient strength. The axle spindle can be hot-forged or shaped to include an integral shoulder. The shape of the bearing stop region must be abruptly transitioned from a straight to a curved configuration. Dimensions of axle spindle vary with different materials, manufacturing techniques, and applications.
The bearing surfaces of the axle spindle are 1.376 inches across, while the bearing spacer is 1.061 inch across. The axle spindle is 1.376 inches long and includes a cotter pin and nut. Typical axle spindle dimensions are listed below. Some axles may have additional components to reduce their weight, while others may not have any. The number of axles and bearings is also important to consider when determining the dimensions of the axle.
The outside shape of the axle spindle 40 is similar to that of the prior art spindle 10. The outer wheel bearing region 44 is cylindrical with a diameter D 1 and an inner wheel bearing region 46. An axially-separating transition region 48 separates the inner bearing region 46 from the outer wheel bearing region 44. It is important to note that the internal diameter is generally slightly larger than the outer wheel bearing region 46.
Axle spindles can be integrally formed or welded to the housing or central beam. They can also be designed differently depending on the intended function. For example, the trailer axle spindle may have a circular or rectangular cross section. Once again, axle spindles are important for safety and longevity, so it is important to know their dimensions. You can also check online for the dimensions of axle spindles.
Driveshaft

Function

Axle spindles are crucial components of a vehicle’s suspension system. They enable a vehicle to move forward, turn, brake, and accelerate. The axle also supports the wheel bearings. In addition to supporting the wheel hub, the axle spindle connects the arms of each wheel to the chassis. This piece is also known as a steering knuckle. The axle spindle’s job is to provide sufficient strength to support the axle.
The functional elements of an axle spindle are cylindrical and have a transition region and an outer surface with an irregular pattern. They have a first and a second diameter, and are shaped to form the spindle’s beam portion and spindle region. The transition region forms a pivotal connection between the axle and the suspension. It also provides the connection between the axle and the trailer. It allows a vehicle to rotate without causing excessive vibrations.
Axle spindles can be circular in structure and are similar to those of the prior art. They support wheel hub configurations. The first end of a spindle is threaded, while the second end is open. The outer wheel bearing region has an outer surface with a diameter D1, while the inner wheel bearing region 46 has a cylindrical outer surface with a diameter D2. The transition region separates the spindle from the rest of the axle.
The spindle nut retains the wheel hub on the spindle, whereas the spindle nut holds the hub assembly in place. A spindle nut retains the wheel on the spindle. A hub cap protects the locking nut assembly and lubrication area. A hub cap is also a common component of the axle. The hub cap also provides a protective shield for the spindle nut.
Steering axle spindles do not extend to the right of the oil seal. They extend from the steering kunckle, which is pivotally joined to the steering axle beam. Despite the differences in bearing seals, wheel hub mounting means, and brake assemblies, the basic spindle configuration is the same. A spindle consists of 2 axially separated bearing regions, 1 with a larger diameter than the other, with a bearing stop adjacent to the inner bearing region.
Driveshaft

Types

The axle is the basic unit of an automobile, and it includes several components. Among these are bearings, axle housings, and wheel hubs. Bearings and axle housings take on all of the radial loads placed on them during operation. As a result, they are necessary to ensure that a vehicle is able to function at its optimum level. But if you’re not sure what these components are, they can make all the difference in your ride.
Axle type depends on a number of factors, including the amount of force produced. In some cases, the vehicle already has pre-designed axles that come in standard formats, but in other cases, a customer can order a custom-made axle for the specific needs of his vehicle. Customized axles give the vehicle operator greater control over the speed and torque of the wheels. To choose the correct axle type for your vehicle, it’s helpful to know the measurements of the axle.
Axle gear sets and lubrication passages are also different. Reverse-cut gears can’t be used in place of standard cut gears, and vice-versa. The 2 types of axle are compatible, but the spline count of the differential case must match that of the axle. It’s important to remember that a different type of axle may work with a different type of machine tool.
Different axle spindle materials have their own advantages and disadvantages. Some are more durable than others, depending on their load capacity. Disc brake hubs and axle spindles are similar to the non-braking ones, but include a rotor and a caliper yoke. The yoke design on the rotor or caliper spindle is specific for each rotor.
Bearing-type axles are the most durable. They transfer the weight of the vehicle to the axle casing. The axle housing is retained by a flange bolted to the hub, and the axle bearings are secured on the spindle by a large nut. Alternatively, axles with bearings are supported solely on the axle spindle and don’t require a hub. Floating axles are typically better for long-term operation, but may be a limited choice for vehicles.
Driveshaft

Installation

Axle spindle installation involves tightening the axle spindle nut to retain the spacer and bearing cones in position. When properly tightened, the axle spindle nut provides the clamp force required to compress the bearing spacer and bearing cone. Preloading is an important part of axle spindle installation because it optimizes bearing life by limiting the tolerance range of end play. Here are some tips on axle spindle installation.
To start the process, you should remove the axle spindle from the vehicle. If the old spindle is not a bolt-on type, a technician will need to cut the weld that holds the axle spindle in place. Then, he or she would need to thread the new spindle back into place. The axle tube must be threaded to accept the new spindle. Once the axle spindle is properly installed, the technician will need to tighten it to the specified torque.
Once the axle spindle is installed, the technician will continue tightening the nut assembly. To ensure a tight grip, the technician will rotate the outer washer while adjusting the torque level on the axle spindle nut. If the nut is not correctly torqued, it may loosen the axle spindle. In addition, improper torque can cause excessive inboard pressure on the outer nut, which can result in over or under-compression of the bearing cone.
The second axle spindle includes an inboard bearing 54 and an outboard bearing 56. The inboard bearing has an inboard surface that abuts the shoulder 26 of the axle spindle. The outboard bearing 57 is mounted on the axle spindle near its outboard end. A bearing spacer 58 is positioned between the inboard and outboard bearings. The spacer and bearing cone group comprises the bearing cones 54 and 56.
Proper alignment of the new spindle is essential for a secure fit. Taking your trailer to a licensed repair facility for a trailer spindle installation is a good idea, as a poorly installed axle can result in improper wheel tracking and premature tire wear. A licensed trailer repair facility can do this for you without much difficulty. This way, you won’t waste your time or frustration on a DIY trailer axle replacement.

China high quality 2.5ton 2500kg Farm Looader Mini Woods Front End Whell Bucket White Yard CZPT Wheel Loader Compact Tractor with V Snow Blade   with high qualityChina high quality 2.5ton 2500kg Farm Looader Mini Woods Front End Whell Bucket White Yard CZPT Wheel Loader Compact Tractor with V Snow Blade   with high quality