Product Description

13/16T/20T Tons truck Semi-Trailer Round/Square American Type axle for After-sale market 

Product Description

Semi-trailer axle refers to the axle assembly specially used on semi-trailer. It is a key part of the vehicle chassis. It usually includes auxiliary accessories such as axle, brake and suspension. It is connected to the trailer body through the suspension. Wheels are installed at both ends of the axle. , its main function is to carry the load of the trailer and maintain the normal driving of the vehicle.

Our lightweight axles are mainly used for powder tank semi-trailers, van semi-trailers, flatbed semi-trailers, container skeleton semi-trailers, oil tank semi-trailers, etc.

The semi-trailer axle is connected by the suspension and the frame, which plays a load-bearing role for the Xihu (West Lake) Dis. trailer. Therefore, before the vehicle runs, check whether the connecting bolts of the external structure of the axle are loose, whether the axle has oil leakage, whether the rim and reducer assembly are Not abnormal noise, etc., to ensure safety.

Semi-trailer axle maintenance:

1. On-time maintenance is performed every 10,000km after the initial maintenance.

2. The contents of regular maintenance include: replacing the lubricating oil, tightening the fasteners, checking the toe-in, checking the wear degree of the brake pads, and if the wear level is reached, it should be replaced in time and the brake gap should be adjusted, and the deceleration should be checked. Whether the gap between the main gear and the driven gear is too large, and whether the gear oil exceeds the function of use, if there is a similar situation, the gap should be adjusted and the grease should be replaced in time.

Product Parameters

Detailed Photos

Applications

The axles are mainly used on semi-trailer. It is a key component of the vehicle chassis. It usually includes auxiliary accessories such as axle, brake and suspension. It is connected to the trailer body through the suspension. The main function of the wheel is to carry the load of the trailer and maintain the normal driving of the vehicle.

The axle is directly related to the load-bearing, braking and driving of the semi-trailer. In order to fully guarantee the semi-trailer’s attendance, safety performance and economic benefits during long-distance travel, it is very important to choose a high-quality axle. Especially in some places, there are many mountain roads for long-distance transportation, the terrain is rugged, long and curved slopes are common, and the driving conditions of vehicles are severe, which puts forward higher requirements for the quality and performance of trailer axles.

Company Introduction

Packaging & Shipping

FAQ

Q. What is your terms of packing?

A: Generally, goods are sealed in ploy bags and packed in cartons and pallet or wood cases.

Q. What is your terms of payment?

A: T/T (deposit + balance before delivery). The photos of the products and packages can be showed before the balance done.

Q. What is your terms of delivery?

A: EXW, FOB, CFR, CIF.  By CZPT shipping or by air or by express, or by land.

Q. How about your delivery time?

A: Generally, it will take 10-30 days after the advance payment done.
The exact delivery time depends on the parts items and the quantity of your order.

Q. Can you produce according to the samples?

A: Yeah, we can produce by your samples and with detailed technical drawings for better. 

Q. What is your sample policy?

A: The sample for free charge if we have ready parts in stock, but the customs tax and courier cost shall be done by buyer party.

Q. How do you make our business long-term and good relationship?

A: We provide our clients with one-stop service, from specific component to final assembled products, solving various problem for different clients all over the world.

###

###

###

###

Types of Axles

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels or to the vehicle itself. Depending on the design, it may be fixed in different positions and have different types of mounting points. It may also have bearings. Axles come in different types and shapes. Some of them are more functional than others, and they may be semi-floating, tandem-drive, or lift axles.

Customized axles work best for cars

Adding big horsepower to a car can increase its performance, but this addition can also cause problems. It is important to take proper measurements for the rear axle to ensure it is not too long or too short. However, this measurement can become complicated with limited-slip differentials and offset pinions.
If you want to add custom axles to your car, it is important to know the physical properties of the axle and what kind of load it can handle. If you’re only planning to make a minor upgrade, it may be enough to get a standard axle. However, if you’re planning to make any major modifications, a customized axle will be a much better option.
Customized axles can be made of a variety of materials. They can be made of carbon steel or nickel steel. Some are made to float freely and others are made to be rigid. If you’re building a car, you should also consider the type of bearings and kingpins that it will use.
Axles come in a variety of types, based on the amount of force they produce. Some are pre-defined, while others are customized to meet your car’s specifications. The advantages of customizing your axles include improved wheel speed and torque. You can even adjust the angle of the axles for even more performance.
Axles can make or break your car’s performance. Customized axles are made with a proprietary alloy material that increases the torsional strength. Because of this, they are able to withstand a tremendous amount of power. Additionally, they are able to withstand lateral and bending loads.
While customizing your axle is an excellent idea, it is also very expensive. The best way to go about it is to work with a professional. They are able to make the axles you need and they’re usually well-made and made of quality materials. However, you should make sure you check the reviews and ratings of the manufacturer before making a purchase.
If you want to shorten the axle on your car, you should have it machined with new splines. The number of splines on an axle is important because it determines the strength of the axle. A 33-spline axle is more durable than a 28-spline axle, and a 40-spline axle is even stronger.

Semi-floating axles

Semi-floating rear axles are a common type of axle used in midsize trucks. They utilize a single wheel support bearing and use one axle shaft to transmit rotation to the wheels. A semi-floating axle is typically lubricated. Aftermarket kits are available to make the axle shaft stronger. However, these kits do not upgrade the axle differential assembly. Therefore, axles with weak differential assemblies may not benefit from conversion.
Semi-floating axles feature a “C-Clip” for holding the axle shaft in place in the axle casing. The problem with this design is that the axle shaft is exposed to more wear and tear. In addition, axle shafts with a C-Clip must be surface-hardened in the area where the axle shaft is flexed.
Semi-floating axles differ from full-floating axles in their appearance. A semi-floating axle has a hub that looks like the hub of a 3/4-ton 14-bolt Ford axle, whereas a full-floating axle’s hub looks like that of a 1 ton Ford axle.
Semi-floating axles have a tapered end. This makes them more efficient in carrying weight. In addition, they have a keyed end to prevent the rear hub from slipping around. This ensures the axle remains stable even when the rear wheels are turning. It is also important to note that semi-floating axles can only carry a small amount of weight, while full-floating axles can carry a lot of weight.
Semi-floating axles are lighter than full-float axles, which makes them less expensive to manufacture. Additionally, if one axle fails, the vehicle will continue to operate normally. Aside from this, semi-floating axles also have c-clips, which are the bearings that bear the weight of the vehicle.
A semi-floating axle is also available with an optional 5-lug hub. The axle shaft transmits rotational torque from the differential to the wheel, and the hub rides on tapered roller bearings. A full-floating axle assembly is stronger than a semi-floating axle system. In addition, it is compatible with factory 5-lug hubs.
Semi-floating axles are easier to install than full-floating axles. However, if you want to convert your semi-floating axle to a full-floating axle, you can install an aftermarket kit.

Tandem-drive axles

A tandem drive axle is a type of axle with two wheels on one side of the vehicle. Compared to a single axle with two wheels, a tandem drive axle is 60 pounds lighter and offers improved performance and durability. This type of axle is designed to optimize fleet uptime by balancing design efficiency and application-specific demands.
The suspension system of a tandem drive axle includes air springs that control the suspension of the lead and trailing axles. The air springs are pneumatically connected to a common reservoir. The springs’ displacements are averaged to provide a controlling input to the air spring pressurization controller.
A tandem drive axle may be used to transport heavier loads. It is important to note that the maximum weight of a tandem drive axle may be different in different states. In general, the federal regulations allow up to 34K pounds per axle, but the state regulations may be different. However, the weight limits of tandem axle groups are significantly lower than for single axles.
A tandem drive axle is a common type of vehicle drive axle. It is characterized by two axles spaced more than 40 inches apart. The distances are measured from the axle centers. A tandem-drive axle may be a drive axle or a steer axle. If the steer axle is overloaded, steering will be more difficult.
A tandem drive axle is a popular choice for commercial trucks. It is durable and can handle heavy loads. It is often used in cement mixing trucks and tanker trucks, where the weight of the load is distributed evenly between the two axles. The combination of the two axles helps a tandem drive truck make a smoother start from a stopped position. Because the weight is distributed across two axles, the torque generated by the engine can be distributed more effectively.
A tandem drive axle is usually paired with two air-lift axles. A tandem drive axle is also used when the weight of a cargo truck cannot be supported by the two air-lift axles. Tandem-drive axles are typically installed at the rear of a truck’s chassis.

Lift axles

Lift axles are a great way to reduce the workload on your powertrain, while also improving your fuel economy. These axles reduce rolling resistance, thrust, and tandem scrub, and can improve fuel economy by two to five percent. However, you should use lift axles with care, and pay special attention to suspension spacing.
Some lift axles have a steering feature, which allows the driver to control when the axle is raised, which is useful for taking sharp corners. However, some drawbacks to non-steerable lift axles include excessive tire wear. Steerable lift axles can alleviate this problem, but they are generally more expensive.
Another benefit of lift axles is that they increase a vehicle’s weight carrying capacity. This is useful for trucks with large load capacities. Although state laws vary, federal regulations are generally in favor of spreading the weight of a truck’s cargo across several axles. This helps protect large road pavements and bridges.
Lift axles are an important feature of dump trucks and should be considered if you’re considering making a change. However, they can be costly, and it’s important to consider the costs and benefits before deciding on a new configuration. These axles are best used when the load capacity of a truck is more than double what it is capable of carrying.
The developed algorithm has been tested under various scenarios. First, the algorithm accepts the command from the driver to lift axles. However, it ignores the tag axle dropping command if the vehicle is traveling more than 30 kph. Second, the vehicle stops for about 60 seconds. Once loaded, the algorithm drops the axles in order.
Besides enhancing the weight carrying capacity of a truck, lift axles are also used for auxiliary purposes. Most of these axles are used on dump trucks. In addition to the pusher axle, some dump trucks have a tag axle, which increases the distance between the steer axle and rearmost axle. This allows the truck to carry more cargo than the pusher axle.

editor by czh 2022-12-06